600mA Switch Mode Universal Power Adapter

600mA Switch Mode Universal Power Adapter

Availability: In Stock
$15.66
-+
600mA Switch Mode Power Adapter 3 / 4.5 / 5 / 6 / 7.5 / 9 /12 VDC Includes 6x Interchangeable Power Connectors. SAA Approved

Specifications:
*INPUT
INPUT VOLTAGE: 100 to 240 V AC
INPUT FREQUENCY: 50/60 Hz
NO LOAD POWER CONSUMPTION: <0.3 W
INPUT FULL LOAD CURRENT (AT 120 V AC) 0.16 A
INPUT POWER: 10.6 W Max
*HI-POT
INPUT TO OUTPUT: 3000V AC 5mA 50/60Hz
INPUT TO CASE: 3000V AC 5mA 50/60Hz
OUTPUT TO CASE: 1500V AC 5mA 50/60Hz
ISOLATION RESISTANCE: 100 M Ohms I/P - O/P I/P/Enclosure
APPLIANCE CLASS: I II III
*OVERALL PERFORMANCE
TOTAL OUTPUT POWER: 7.2W Max
EFFICIENCY Complied with EUP
*ENVIRONMENTAL
OPERATING TEMPERATURE: 0° C to 40° C
STORAGE TEMPERATURE: -20° C to 60° C
OPERATING HUMIDITY: 20% - 85% RH. NON CONDENSING
STORAGE HUMIDITY: 10% - 90% RH. NON-CONDENSING
*PROTECTION
OVER CURRENT PROTECTION
SHORT CIRCUIT PROTECTION
OVER VOLTAGE PROTECTION
L.P.S (Limits for power source)
OVER POWER PROTECTION
*SAFETY STANDARDS
SAFETY STANDARDS: 7.2W MaxGS 7.2W Max GS
EMC STANDARDS CE Complied with EUPComplied with EUP
*RELIABILITY
MTBF 50000 hours min
BURN IN 4 hours 25°C, full load, 220V AC, 50Hz
*OUTPUT
LIGHT LOAD OUTPUT VOLTAGE: 3.0/4.5/5.0/6.0/7.5/9.0/12 V DC ± 10%
FULL LOAD OUTPUT VOLTAGE: 3.0/4.5/5.0/6.0/7.5/9.0/12 V DC ± 10%
MIN LOAD OUTPUT CURRENT: 0 A
MAX LOAD OUTPUT CURRENT: 0.6 A
NOISE TEST BANDWIDTH 20 MHz Each output by passed by a 10 uF electrolytic capacitor parallel with a 0.1uF ceramic capacitor to GND
LINE REGULATION 0.5% Input 90 to 264 V AC output loaded at full load
SETUP, RISE, HOLD UP TIME 200ms, 30ms, 17ms/115V AC; 200ms, 20ms, 80ms/230V AC

Package includes:
1 x 600mA Switch Mode Power Adapter

For more information:
http://www.igeneration.net.nz/p/12622/

RRP:$30

Write a review

Note: HTML is not translated!
    Bad           Good

Flashcards © 2018